The ability of an Android device to intelligently manage connections to available wireless networks is a key feature for maintaining consistent connectivity. This system evaluates the quality of Wi-Fi and cellular signals, automatically transitioning between them based on signal strength and data throughput. For example, if a device is connected to a weak Wi-Fi signal and a stronger cellular connection is available, the device may switch to cellular to ensure a stable internet connection.
This automated network management offers several advantages. Users experience reduced interruptions in data flow, improved battery life due to avoiding weak or unstable Wi-Fi connections, and streamlined access to the best available network. Historically, users had to manually select the best network. The introduction of automated switching capabilities significantly simplified this process and improved the overall user experience of mobile devices.
The subsequent sections will explore the underlying mechanisms of this intelligent network selection, configuration options available to users, and troubleshooting steps for resolving potential connectivity issues.
1. Signal Strength Threshold
The signal strength threshold is a critical parameter governing the behavior of Android’s intelligent network selection. It represents the minimum acceptable signal strength, typically measured in dBm (decibel-milliwatts), required for a device to maintain a connection to a Wi-Fi network. If the signal strength falls below this threshold, the system initiates a search for a more robust network, potentially switching to cellular data to maintain connectivity. The precise value of this threshold directly influences how aggressively the device transitions between Wi-Fi and cellular networks. A poorly configured threshold can lead to frequent, disruptive switches, negatively impacting user experience. For example, if the threshold is set too high, the device might disconnect from a perfectly usable, albeit slightly weaker, Wi-Fi signal and switch to cellular data, consuming mobile data unnecessarily. Conversely, if the threshold is set too low, the device may remain connected to an almost unusable Wi-Fi network, resulting in slow data transfer rates and a degraded online experience.
The significance of the signal strength threshold extends to power management and data consumption. Frequent network switching consumes battery power. By carefully calibrating the threshold, users can minimize unnecessary transitions and optimize battery life. Furthermore, understanding the interaction between signal strength and network selection is essential for users with limited data plans. An appropriate threshold prevents inadvertent over-reliance on cellular data, mitigating the risk of exceeding data limits and incurring additional charges. Many Android devices provide options, often hidden in developer settings, to manually adjust this threshold, thereby tailoring network behavior to individual needs and usage scenarios.
In summary, the signal strength threshold acts as a crucial determinant in the intelligent network selection process. Its proper configuration balances connectivity reliability, battery consumption, and data usage. A thorough understanding of this parameter empowers users to optimize their mobile experience by tailoring network behavior to their specific circumstances and preferences. While not always directly exposed to the end-user, this element underpins the automated decision-making that characterizes the Android network management system.
2. Automatic Network Selection
Automatic Network Selection represents a core function within Android’s intelligent network management framework. This feature enables the operating system to autonomously evaluate and choose the most appropriate available network connection based on predefined criteria. Its efficient operation is paramount to the success of the broader system, ensuring a seamless and reliable connectivity experience for the user.
-
Evaluation Metrics
The network selection process hinges on a multi-faceted evaluation of available networks. Signal strength, network type (Wi-Fi or cellular), data throughput capabilities, and network stability are all considered. These metrics are weighted and combined to generate a score for each available network. For example, a Wi-Fi network with high signal strength and low latency might be preferred over a cellular network, even if the cellular network exhibits moderate signal strength. This evaluation happens constantly in the background.
-
Prioritization Rules
Android enforces a set of prioritization rules that govern network selection. Typically, Wi-Fi networks are preferred over cellular networks when available, assuming the Wi-Fi signal strength meets a defined threshold. User-defined preferences, such as preferred Wi-Fi networks, can also override these default rules. This allows users to prioritize specific networks, such as their home or office Wi-Fi, over public networks. For example, a user might configure their device to automatically connect to their home Wi-Fi network whenever it is in range, irrespective of the cellular signal strength.
-
Seamless Transitioning
A critical aspect of automatic network selection is the ability to seamlessly transition between networks without interrupting data flow. When a device detects a superior network, the system initiates a handover process, transferring the connection from the current network to the new network with minimal disruption. This process involves establishing a new connection and transferring ongoing data streams to the new pathway. For instance, if a user walks from their home, connected to Wi-Fi, to their car, the system should automatically switch to cellular data without a noticeable interruption in music streaming or navigation.
-
Power Optimization
Automatic Network Selection contributes to power optimization by preventing devices from remaining connected to weak or unstable networks. Consistently maintaining a connection to a poor signal demands more power. By switching to a stronger signal or employing cellular when Wi-Fi is inadequate, the system conserves battery life. For example, if a device remains connected to a distant Wi-Fi access point with a very weak signal, the radio constantly searches, which is a power drain. Switching to cellular or a closer Wi-Fi, which is a power saver, is a power drainer.
In conclusion, Automatic Network Selection is integral to Android’s intelligent network management. By evaluating network characteristics, enforcing prioritization rules, facilitating seamless transitions, and optimizing power consumption, it ensures that the device consistently selects the most appropriate available network, providing a reliable connectivity experience for the user. This automation removes the need for manual network selection, streamlining the user experience and ensuring the optimal balance between connectivity and power efficiency.
3. Cellular Data Preference
Cellular Data Preference, within the context of intelligent network selection on Android devices, dictates the system’s inclination toward utilizing mobile network connections relative to available Wi-Fi networks. This setting plays a pivotal role in managing data usage, connectivity stability, and overall user experience. The specific implementation of Cellular Data Preference varies across Android versions and device manufacturers, but its core functionality remains consistent: to influence the decision-making process behind network selection.
-
Prioritization of Cellular over Wi-Fi
One manifestation of Cellular Data Preference is a setting that explicitly prioritizes cellular data, even when a Wi-Fi network is available. This option is typically employed in scenarios where a stable and reliable connection is paramount, and the user is willing to incur mobile data charges to ensure uninterrupted connectivity. For example, during video conferencing or live streaming, a user might prefer a consistent cellular connection over a potentially fluctuating Wi-Fi signal. This preference overrides the system’s default inclination towards Wi-Fi when available.
-
Wi-Fi Assist and Similar Implementations
Many Android devices incorporate a feature commonly known as “Wi-Fi Assist” or similar branded implementations. This functionality monitors the quality of the Wi-Fi connection and automatically switches to cellular data when the Wi-Fi signal becomes weak or unstable. This approach seeks to provide a seamless user experience by minimizing interruptions caused by poor Wi-Fi performance. For example, if a user is browsing the web and moves to an area with weak Wi-Fi coverage, Wi-Fi Assist will automatically switch to cellular data, maintaining uninterrupted web browsing. The threshold for triggering the switch is pre-defined and may not be user-adjustable.
-
Data Saver Mode Interaction
Cellular Data Preference often interacts with the device’s Data Saver mode. When Data Saver is enabled, the system restricts background data usage and may further bias network selection towards Wi-Fi networks to conserve mobile data. This represents a contrasting approach to prioritizing cellular data and highlights the trade-offs between connectivity reliability and data conservation. For example, when Data Saver is active, the device might remain connected to a weaker Wi-Fi signal rather than switching to cellular data, even if the user experiences slightly reduced data speeds.
-
Application-Specific Preferences
Certain Android versions and device manufacturers allow users to set Cellular Data Preferences on a per-application basis. This provides granular control over data usage and allows users to tailor network behavior to the specific needs of individual applications. For example, a user might allow an email application to use cellular data in the background for push notifications but restrict a video streaming application to Wi-Fi only. This functionality offers a compromise between global network preferences and application-specific requirements.
In summary, Cellular Data Preference is a multifaceted aspect of intelligent network selection, offering various approaches to managing the balance between Wi-Fi and cellular data usage. Whether through explicit prioritization, Wi-Fi Assist-style implementations, interaction with Data Saver mode, or application-specific settings, Cellular Data Preference empowers users to customize network behavior according to their specific needs and priorities. Its correct understanding and configuration are essential for optimizing data consumption, ensuring stable connectivity, and maximizing the overall user experience on Android devices.
4. Wi-Fi Prioritization Settings
Wi-Fi prioritization settings form a crucial component of Android’s intelligent network selection mechanism. These settings allow users to influence the device’s preference for specific Wi-Fi networks, thereby customizing the behavior of the “android smart network switch” feature and tailoring it to individual needs and usage patterns. The effective management of these settings directly impacts the user experience by influencing network connectivity, data consumption, and battery life.
-
Network Preference Ordering
Android typically assigns priority to Wi-Fi networks based on signal strength and previously established connections. However, Wi-Fi prioritization settings allow users to manually adjust the order in which networks are preferred. For instance, a user might designate their home network as the highest priority, ensuring that the device automatically connects to it whenever it is within range, regardless of the signal strength of other available networks. This customization overrides the default network selection logic and directly influences the “android smart network switch’s” behavior, forcing it to favor the specified network.
-
Manual Network Selection Override
Although the “android smart network switch” feature aims to automate network selection, users retain the ability to manually select a Wi-Fi network from the available list. This manual selection temporarily overrides the automatic switching mechanism, forcing the device to remain connected to the chosen network until the user either selects a different network or disables the manual override. This capability is useful in situations where the automatic switching logic is not behaving as desired, such as when the device repeatedly switches between two networks with similar signal strengths.
-
“Forget Network” Functionality
The “forget network” functionality, accessible within Wi-Fi settings, provides a mechanism to completely remove a Wi-Fi network from the device’s list of known networks. This action effectively prevents the “android smart network switch” feature from automatically connecting to that network in the future. This is beneficial when a network is no longer accessible or when the user wishes to avoid connecting to it due to security concerns or poor performance. Removing a network resets its priority and prevents it from influencing future automatic network selections.
-
Hidden Network Configuration
Android allows users to manually add hidden Wi-Fi networks by specifying the network name (SSID) and security credentials. While these networks are not actively broadcasted, the “android smart network switch” feature can still connect to them if they are configured on the device. Properly configuring hidden networks ensures that the device can seamlessly connect to them when within range, regardless of whether they are visible in the list of available networks. This expands the range of networks that the automated switching feature can utilize.
In conclusion, Wi-Fi prioritization settings offer a suite of tools for customizing the behavior of the “android smart network switch” feature. By manually adjusting network preferences, overriding automatic selection, forgetting unwanted networks, and configuring hidden networks, users can fine-tune the device’s network connectivity to match their specific requirements and preferences. These settings provide a crucial layer of control over the automated network management system, ensuring a personalized and optimized user experience.
5. Connectivity Status Monitoring
Connectivity status monitoring serves as a foundational element for the proper function of the “android smart network switch.” This process involves the continuous assessment of available network connections, evaluating parameters such as signal strength, data throughput, packet loss, and latency. These metrics provide real-time insights into the quality and stability of each network, enabling the operating system to make informed decisions about network selection. Without accurate and timely connectivity status monitoring, the “android smart network switch” would be unable to determine the optimal network for the device to connect to, resulting in potentially degraded performance and interrupted connectivity. For example, a device connected to a Wi-Fi network with a strong signal strength but high packet loss might experience significant delays and dropped connections. Connectivity status monitoring identifies this issue, prompting the “android smart network switch” to consider alternative networks with better performance characteristics.
The integration of connectivity status monitoring directly impacts the responsiveness and efficiency of the “android smart network switch.” A sophisticated monitoring system can predict potential connectivity issues before they become disruptive, allowing the device to proactively switch to a more reliable network. This is particularly crucial in mobile environments where network conditions can change rapidly. Furthermore, historical data gathered through connectivity status monitoring can be used to optimize network selection algorithms, improving the overall performance of the “android smart network switch” over time. An example of this is a device that frequently encounters congestion on a specific Wi-Fi network during peak hours. Connectivity status monitoring can learn this pattern and prioritize alternative networks during those times, ensuring a more stable connection.
In summary, connectivity status monitoring is not merely a supplementary feature but an integral component of the “android smart network switch.” Its accuracy and efficiency directly determine the effectiveness of network selection, impacting user experience, data throughput, and overall connectivity stability. Challenges remain in accurately assessing network performance in complex and dynamic environments. However, continued advancements in connectivity status monitoring technologies promise to further enhance the capabilities of the “android smart network switch” and improve the mobile connectivity experience.
6. Seamless Network Transitions
Seamless network transitions are a direct consequence of the “android smart network switch” functionality. The purpose of the system is to maintain uninterrupted connectivity as a device moves between Wi-Fi and cellular networks, or between different Wi-Fi access points. A primary cause of a disruptive network transition is a poorly implemented or configured “android smart network switch.” When the system fails to accurately assess network quality or execute a rapid handover, users experience dropped connections, buffering, or complete loss of network access. For example, if a device is streaming video while moving from a home Wi-Fi network to a cellular connection, the ideal scenario involves the video stream continuing without interruption. This depends on a properly functioning “android smart network switch.”
The “android smart network switch” determines when and how to initiate a network transition. This involves evaluating factors such as signal strength, data throughput, and network latency. If the signal strength of the current Wi-Fi network drops below a predefined threshold, the “android smart network switch” begins evaluating available cellular networks. If a suitable cellular connection is found, the system initiates a handover process, attempting to seamlessly transfer the data connection from Wi-Fi to cellular. A real-world application includes voice over IP (VoIP) calls. If the quality of the Wi-Fi network degrades during a call, the “android smart network switch” should transition the connection to the cellular network to prevent the call from dropping. The quality of this transition directly impacts the user experience, determining whether the call remains clear and uninterrupted.
In conclusion, seamless network transitions are the desired outcome of a well-functioning “android smart network switch.” A robust system minimizes disruptions and ensures a consistent connectivity experience. The practical significance of understanding this relationship lies in troubleshooting connectivity issues. When users experience frequent or noticeable network interruptions, it often indicates a problem with the “android smart network switch” configuration or performance. Addressing these issues may involve adjusting network settings, updating device software, or seeking technical support. The ultimate goal remains to provide a smooth and transparent transition between networks, ensuring that users can remain connected regardless of their location or network environment.
7. Battery Life Optimization
The “android smart network switch” plays a critical role in optimizing battery life on mobile devices. Inefficient network management is a significant source of battery drain. The “android smart network switch,” when functioning correctly, minimizes unnecessary power consumption by intelligently selecting the most efficient network connection. When a device is constantly searching for or connected to a weak Wi-Fi signal, the radio consumes substantial power. A properly configured “android smart network switch” will recognize the poor signal strength and disconnect from the Wi-Fi network, switching to cellular data if available, or remaining idle if no suitable connection exists. This prevents the radio from continually scanning, thereby extending battery life. A practical example includes a scenario where a user is on the periphery of a Wi-Fi network’s range. Without the “android smart network switch,” the device would persistently attempt to maintain the weak Wi-Fi connection, draining the battery. With the “android smart network switch” active, the device would recognize the suboptimal signal and switch to a cellular connection or remain in a low-power state, conserving battery resources.
Furthermore, the “android smart network switch” can be configured to prioritize Wi-Fi networks when available, minimizing cellular data usage. Cellular data connections are generally more power-intensive than Wi-Fi connections. By preferentially connecting to Wi-Fi networks, the “android smart network switch” reduces the reliance on cellular data, which inherently leads to improved battery performance. The system can also learn usage patterns and adjust its behavior accordingly. For example, if a user consistently connects to a specific Wi-Fi network during certain hours, the “android smart network switch” can proactively prioritize that network during those times, further optimizing battery life. Conversely, if a particular Wi-Fi network is known to be unreliable or slow, the “android smart network switch” can avoid connecting to it, preventing unnecessary power consumption associated with a poor connection. The effectiveness of these configurations is directly tied to the underlying algorithms and user-defined preferences of the “android smart network switch.”
In summary, the “android smart network switch” is intrinsically linked to battery life optimization. Its ability to intelligently manage network connections, avoid weak signals, and prioritize efficient network types directly contributes to reduced power consumption. While the specific implementation and configuration options may vary across Android versions and devices, the underlying principle remains the same: efficient network management translates to extended battery life. The challenges lie in accurately assessing network conditions and adapting to dynamic environments. However, continued refinements to the algorithms and user interfaces of the “android smart network switch” have the potential to further improve battery performance and enhance the overall user experience on mobile devices.
8. User Configuration Options
User configuration options are integral to tailoring the behavior of the “android smart network switch” to individual needs and preferences. These settings provide a degree of control over the automated network selection process, allowing users to influence how their devices connect to and transition between available networks. Understanding these options is essential for optimizing connectivity, managing data consumption, and maximizing battery life.
-
Wi-Fi Preference Lists
Users can often create a prioritized list of Wi-Fi networks, specifying which networks the device should preferentially connect to. This setting overrides the default network selection logic of the “android smart network switch,” ensuring that the device prioritizes specified networks when available, even if their signal strength is lower than other options. This is particularly useful for consistently connecting to home or office networks.
-
Cellular Data Usage Limits
Configuration options frequently include the ability to set data usage limits or alerts for cellular connections. These settings, while not directly controlling the “android smart network switch,” indirectly influence its behavior by prompting the device to favor Wi-Fi networks when approaching data limits. This feature is crucial for managing data costs and avoiding overage charges, causing the “android smart network switch” to be more conservative with its selection.
-
Wi-Fi Assist/Smart Switch Controls
Many devices offer a “Wi-Fi Assist” or similarly named feature that automatically switches to cellular data when the Wi-Fi connection becomes weak or unstable. Users can typically enable or disable this feature, thereby controlling whether the “android smart network switch” proactively transitions to cellular data to maintain connectivity. Disabling this feature may conserve battery life but could result in occasional interruptions in connectivity.
-
Developer Options Overrides
Advanced users can sometimes access more granular configuration options within the Android developer options. These settings may include the ability to adjust the signal strength threshold at which the device switches between Wi-Fi and cellular networks or to disable the automatic network switching feature entirely. Modifying these settings requires caution, as incorrect configurations can negatively impact network performance.
These user configuration options allow for a degree of personalization within the automated network selection process governed by the “android smart network switch”. While the system aims to provide a seamless and efficient connectivity experience, these options empower users to fine-tune the behavior to their specific needs and circumstances, balancing connectivity reliability with data consumption and battery life considerations. The availability and specific functionality of these options may vary across Android versions and device manufacturers, requiring users to explore their device’s settings to understand and utilize these features effectively.
9. Network Availability Checks
Network availability checks represent a fundamental process underpinning the “android smart network switch” functionality. These checks are systematic assessments designed to determine the presence and operational status of potential network connections, both Wi-Fi and cellular. Their accuracy and frequency directly influence the efficacy of the “android smart network switch” in selecting the optimal network for a device.
-
Periodic Scanning
Android devices perform periodic scans for available Wi-Fi networks. This involves the device’s Wi-Fi radio actively searching for broadcasted network names (SSIDs). The frequency of these scans is often dynamically adjusted based on factors like battery level and user activity to balance responsiveness and power consumption. These scans provide the “android smart network switch” with a regularly updated list of potential Wi-Fi connections.
-
Cellular Network Registration
Devices maintain a persistent connection to the cellular network, constantly monitoring signal strength and registration status. This process ensures that the “android smart network switch” is aware of the availability and quality of the cellular connection. Loss of cellular registration triggers a re-registration attempt and informs the “android smart network switch” of a potential need to switch to a Wi-Fi network.
-
Connectivity Probes
Beyond simply detecting the presence of a network, devices actively probe the network’s connectivity. This involves sending test packets to a known server and measuring the response time and packet loss. These probes provide a more accurate assessment of network quality than signal strength alone, allowing the “android smart network switch” to differentiate between a network with a strong signal but poor performance and a network with a weaker signal but reliable connectivity.
-
Passive Monitoring
Devices passively monitor network performance by analyzing the traffic passing through the connection. This includes tracking data throughput, latency, and packet loss. This passive monitoring provides a continuous stream of data to the “android smart network switch,” enabling it to detect subtle changes in network performance and proactively switch to a more stable connection if necessary.
The information gathered through these network availability checks forms the basis upon which the “android smart network switch” makes its decisions. Without this continuous monitoring and assessment, the system would be unable to intelligently select the best available network, resulting in a less reliable and efficient connectivity experience. The effectiveness of these checks directly impacts the overall performance and user satisfaction with the “android smart network switch” feature.
Frequently Asked Questions
This section addresses common questions and clarifies misconceptions surrounding the Android Smart Network Switch functionality, aiming to provide a comprehensive understanding of its behavior and capabilities.
Question 1: What is the primary function of the Android Smart Network Switch?
The Android Smart Network Switch automatically selects the optimal available network connection, choosing between Wi-Fi and cellular data, based on factors such as signal strength and data throughput to ensure consistent internet access.
Question 2: Can the Android Smart Network Switch be disabled?
In most Android versions, a direct toggle to disable the Smart Network Switch feature is not available. However, its behavior can be influenced by adjusting Wi-Fi preferences, cellular data settings, and enabling Data Saver mode, each indirectly affecting its operation.
Question 3: How does the Android Smart Network Switch determine which network is “best”?
The system evaluates network quality based on several criteria, including signal strength, data speed, network stability, and previous connection history. Wi-Fi networks are generally preferred, but the Smart Network Switch may favor cellular data if Wi-Fi connectivity is weak or unreliable.
Question 4: Does the Android Smart Network Switch consume additional battery power?
While the Smart Network Switch aims to optimize battery life by avoiding weak connections, it does require some processing power to continuously monitor network conditions. The power consumption impact is generally minimal but can be noticeable in areas with constantly fluctuating network signals.
Question 5: What happens if a device is connected to a secure Wi-Fi network, but the Android Smart Network Switch is still active?
Even when connected to a secure Wi-Fi network, the Smart Network Switch continues to monitor network performance. If the Wi-Fi connection becomes unstable, it may switch to cellular data, potentially exposing data traffic to the mobile network if the Wi-Fi connection is specifically intended for secure communications.
Question 6: How can the Android Smart Network Switch be troubleshooted if it appears to be malfunctioning?
Troubleshooting steps include verifying Wi-Fi and cellular settings, checking for software updates, restarting the device, and resetting network settings. If problems persist, contacting the device manufacturer or network carrier may be necessary to identify and resolve underlying issues.
Key Takeaways: The Android Smart Network Switch is designed to automate network selection, but its behavior can be influenced by various settings. Understanding its functionality and configuration options is crucial for optimizing connectivity and managing data usage effectively.
The following section will delve into advanced customization options and provide guidance on optimizing the Android Smart Network Switch for specific use cases.
Tips for Optimizing Android Network Connectivity
The following guidelines assist in maximizing the effectiveness of the “android smart network switch” feature, ensuring stable connectivity and efficient resource utilization.
Tip 1: Prioritize Known Networks. Configure a preferred network list within Wi-Fi settings. The “android smart network switch” will prioritize these networks, minimizing reliance on cellular data in familiar environments, but do check your connection for security purposes. A preferred network list of unknown network, could be an espionage by hacker.
Tip 2: Monitor Signal Strength. Regularly assess the Wi-Fi signal strength in frequently visited locations. Weak signals trigger frequent switching, consuming battery power. Adjusting router placement or using a Wi-Fi repeater may improve signal quality and reduce unnecessary “android smart network switch” activity.
Tip 3: Disable Wi-Fi Assist Judiciously. The “Wi-Fi Assist” feature, if available, automatically switches to cellular data when Wi-Fi connectivity is poor. Disable this feature when data conservation is paramount and intermittent connectivity is tolerable. Be mindful that this action could affect usage of network.
Tip 4: Update Device Software. Ensure the Android operating system and network drivers are current. Updates often include optimizations and bug fixes that enhance the performance and stability of the “android smart network switch” mechanism.
Tip 5: Implement Data Usage Controls. Set data usage limits within Android settings to prevent unintended cellular data consumption. The “android smart network switch” will be indirectly influenced to prioritize Wi-Fi networks when approaching these limits.
Tip 6: Restart the Device Periodically. Regular device restarts clear temporary files and refresh system processes, potentially resolving minor issues that interfere with the proper operation of the “android smart network switch.”
Tip 7: Investigate Third-Party Applications. Certain applications may interfere with the “android smart network switch.” Monitor network performance after installing new applications to identify potential conflicts. Troubleshoot any conflict immediately.
These tips, when implemented consistently, enhance the effectiveness of the “android smart network switch” feature, contributing to improved network stability, efficient data usage, and optimized battery performance.
The subsequent section concludes this exploration, summarizing key findings and providing final recommendations for maximizing the benefits of intelligent network management on Android devices.
Conclusion
The preceding discussion comprehensively explored the “android smart network switch,” detailing its operational principles, configuration options, and impact on the user experience. A clear understanding of signal strength thresholds, network prioritization, and cellular data preferences is essential for optimizing the functionality of this system. The efficient execution of network availability checks and seamless transitions directly influences connectivity stability and battery life. User configuration options allow for a degree of customization, enabling individuals to tailor network behavior to specific needs.
The effective management of the “android smart network switch” is critical for ensuring reliable connectivity and efficient resource utilization on Android devices. Continued exploration of advanced settings and monitoring tools is encouraged to maximize the benefits of intelligent network management in evolving mobile environments. Further development of this technology will be central to user satisfaction. The users have to use their own mobile devices with responsibility.
